1. Agreeing to these terms
These terms govern your use of shadenshieldwindowfilm.com. By using the site you accept them. If you don’t, don’t use the site — call us instead.
These terms cover the website. The work itself is governed by the written estimate or contract you sign with us, which controls over anything on this page if the two ever disagree.
“We” and “us” mean Shade N Shield Window Film LLC, a Utah limited liability company.
2. The information on this site
We write the pages on this site to be accurate and we correct them when they’re wrong. They are general information about window film, not advice about your building. Window film behavior depends on the specific glass, its construction, its orientation, its shading, and the building around it — none of which we can assess from a web page.
Nothing on this site creates a professional relationship between us or commits us to a particular recommendation, price or outcome. That happens when we look at your glass and put something in writing.
3. Performance figures and manufacturer specifications
Where this site states a performance figure — total solar energy rejected, visible light transmission, glare reduction, UV rejection, a security rating — that figure comes from the film manufacturer’s published specification for a named film, measured under the test conditions that specification states. We cite the film and, where relevant, the standard.
Those are laboratory figures on a defined glass construction. They are not predictions about your windows. We do not publish and will not give you an energy saving percentage, a payback period, a temperature drop or a resistance time in minutes for your property, because we would have to make it up.
Security film standards — including ANSI Z97.1, CPSC 16 CFR 1201, ASTM F1642, ASTM E1886 and E1996, EN 356 and EN 12600 — measure defined test conditions. Several of them are achieved by the film together with a perimeter attachment system, and a rating earned by a tested assembly does not transfer to the film alone. No film makes glass unbreakable, burglar-proof or bullet-resistant, and nothing on this site should be read as saying otherwise.
Specifications change when manufacturers revise products. The specification sheet current at the time of your estimate governs your job.
4. Estimates, quotes and contracts
- Site visits and estimates are free within our stated service area, and carry no trip charge and no obligation.
- Any figure given verbally, by text, or over the phone is an indication only. Only a written estimate signed by us is a quote.
- An estimate covers the scope described on it. Work discovered on arrival that isn’t in that scope — existing film that has to be stripped, glass damage, access that turns out to need equipment we didn’t anticipate — is quoted and agreed before we proceed, not added to your invoice afterwards.
- A quote does not hold a date. Scheduling requires a deposit, with the balance due on completion. We accept card payment and digital invoices.
- Commercial accounts. We accept a purchase order number on any commercial job. A deposit schedules the work, with the balance due on completion, and terms for larger projects are set out in the written scope. Standing maintenance programs — scheduled anti-graffiti replacement, for example — are invoiced on the same basis at a rate agreed at survey.
- You can reschedule at any time. A deposit paid for an installation is not refundable if you cancel within 72 hours of the scheduled install.
We reserve the right to decline work. The most common reason is the honest one: the film you want isn’t compatible with the glass you have, and we won’t install something we expect to fail.
5. Your glass, and what we rely on you to tell us
Film changes how much solar energy glass absorbs, and the wrong film on the wrong glass can cause thermal stress fracture or affect a sealed unit. We work to film manufacturers’ published glass compatibility charts and we assess your glass before recommending anything — that assessment is the core of what you’re buying.
That assessment depends partly on what only you know. Please tell us, before we quote, if you’re aware of:
- Existing Low-E or other coatings on the glass
- Previous film, repairs, or glass that has already been replaced
- Existing chips, cracks, scratches or edge damage
- Any window manufacturer warranty you want preserved, and its terms
- Window coverings, furniture or shading that sits close to the glass
We’ll inspect and note the condition of the glass before we start, and we’ll point out damage we find. But we can’t be responsible for a failure caused by a condition that was concealed from us or that isn’t visible on inspection.
Whether applying aftermarket film affects your window manufacturer’s warranty is between you and that manufacturer. Terms vary by brand and product line, we don’t speak for them, and we recommend you check before buying from anyone. Section 6 covers the coverage that does apply.
6. Warranties
The manufacturer’s film warranty covers the film itself: bubbling, peeling, discoloration, adhesive failure and delamination. It is issued by the manufacturer on their terms, and we register it for you.
Our installation warranty covers our workmanship and matches the manufacturer’s film warranty for your film.
Film carries the manufacturer’s warranty, and our installation warranty matches it. We give you the warranty terms for your film in writing.
Warranties exclude damage from causes outside the product and the install: impact, vandalism, abrasive or ammonia-based cleaners, scrapers and razor blades, alterations by someone else, and normal wear. Film has a service life; it is not permanent.
Your estimate names the warranty that applies to your film line. Keep it: a claim is much easier with the paperwork.
7. Reviews and project photographs
Reviews published on this site are reproduced as the customer wrote them, attributed and dated, including the ones we’d rather not have. We don’t edit them for content, we don’t write them, we don’t pay for them, and we don’t offer anything in exchange for a favorable one or condition any incentive on what a review says.
Project photographs are our own photographs of our own completed work. We never use stock imagery to represent a job. We publish the city and sometimes the neighborhood, never an exact address, and for security or anti-graffiti work nothing beyond the city. If you want a photograph of your property removed, tell us and we’ll remove it. Our Privacy Policy has the detail.
Where a page describes a job we did, it describes that job. It is not a prediction of your result.
8. Licensing
We are licensed in Utah as an S230 specialty contractor through the Division of Occupational and Professional Licensing, and insured. We’ll give you our license number upon request. You can also confirm our license independently by searching our business name on Utah DOPL’s license lookup. A certificate of insurance is available for commercial work.
9. Site content and your use of it
The text, photographs, guides, comparisons and design on this site are ours, except for manufacturer trademarks and specification data, which belong to their owners. LLumar, Solar Gard, V‑KOOL and Hüper Optik are trademarks of their respective owners; we are an authorized dealer, not the manufacturer.
You’re welcome to read it, print it, and send it to anyone. Please don’t republish our photographs or copy our written pages onto another site — particularly a competitor’s. Quote us with a link and we have no complaint.
Don’t use the site to do anything unlawful, to scrape it at a volume that degrades it for other people, to probe it for vulnerabilities, or to submit forms you have no intention of hearing back on.
11. Links to other sites
We link to manufacturer specification sheets, published standards and other outside pages. We don’t control them and we’re not responsible for their content or their privacy practices. A link isn’t an endorsement of everything on the other end of it.
12. Disclaimer and limitation of liability
The site is provided as it is. We don’t warrant that it will be uninterrupted, error-free, or that every figure on it is current at the moment you read it.
To the fullest extent Utah law allows, we are not liable for indirect, incidental, special or consequential damages arising from your use of this website, or from reliance on general information published on it. Our total liability arising from the website itself is limited to what you paid us for work, if anything.
This section limits liability relating to the website. It does not limit our obligations for the work we perform at your property, which are governed by your contract, by our installation warranty, by the manufacturer’s warranty, and by Utah law. Nothing here excludes any liability that cannot lawfully be excluded, and nothing here affects any consumer right Utah law gives you.
13. Governing law and disputes
These terms are governed by the laws of the State of Utah, without regard to conflict-of-laws principles. Any dispute arising from the website or these terms belongs in the state or federal courts located in Utah, and both of us consent to that jurisdiction.
Before anyone files anything: contact us. Nearly everything is a misunderstanding that a phone call fixes, and we’d rather fix it than argue about it.
14. Changes, severability and contact
We may update these terms. The current version is always on this page with its date at the top, and it applies from the date it’s posted. Material changes won’t be applied retroactively to a contract already signed.
If any part of these terms is held unenforceable, the rest stands. Our not enforcing something on one occasion doesn’t waive it. These terms, together with your signed estimate or contract and our Privacy Policy, are the whole agreement about the website.
Questions: