Residential

Window tint for Utah homes that get too much sun.

If one room is unusable during the day, your floors are fading, or the TV is unwatchable half the day — that’s solar energy coming through the glass. Residential window tinting handles it without touching the windows themselves: the film goes on the glass you already have.

Utah S230 licensed and insured Utah owned and operated Free on-site estimates

Get a free quote

Takes under a minute. We’ll call or text to set up a free on-site estimate.

Rather talk? (801) 441-7774 · Longer form

1 · Your problem

Start with the problem

Each of these is its own page, written to educate homeowners.

Heat, glare & fading

The room that is unusable during the day, the TV you cannot see, the hardwood going pale by the slider. Solar control film on the glass you have.

Learn more →

Security

Clear film that keeps broken glass in the frame on the patio door, the ground-floor windows and the sidelight by the front door.

Learn more →

Daytime privacy

See out, not in, during the day. A mirror or charcoal-tone film that keeps your view and cuts heat. At night with lights on inside, it reverses, so blinds still matter after dark.

Learn more →

Day & night privacy

Bathroom windows, entryways, sidelights or street-level bedrooms. Private day and night, while maintaining natural light — no blind to remember.

Learn more →

Turf & fence protection

Windows can reflect enough sun to melt turf, scorch the lawn, warp a vinyl fence or blister a neighbor’s siding. Exterior film on the pane causing it can reduce the problem.

Learn more →

2 · Film selection

What matters most to you

The right film depends on what you want most. Pick your priority and we’ll show you the options.

If you want

Maximum heat rejection

The most solar energy stopped, accepting a darker shade or more reflective look on the glass.

Dual reflective · Spectrally selective

If you want

Strong heat control, natural light kept

Strong heat rejection combined with the most natural light.

Spectrally selective · Ceramic

If you want

Privacy during the day

See out without being seen in while it’s brighter outside than inside. After dark with the lights on, that reverses. Frosted film gives privacy day and night and maintains the natural light.

Dual reflective · Neutral

Each home is different and comes with its own nuances. We’ll show you the best options for you based on your windows, needs and wants.

Film types explained

Dual reflective film, home

Dual reflective

Reflective sheen from the outside in daylight, with a clear view from the inside looking out. Available in several shades, with different levels of UV protection, daytime privacy, heat rejection and glare reduction.

Learn more →
Neutral film, home

Neutral

A charcoal tone with a lower reflective sheen from the outside. Offers different levels of daytime privacy, heat rejection, UV protection and glare reduction.

All glass has a natural level of exterior reflection before film is installed. Your glass type and coating also affect how the film looks from outside in bright light.

Learn more →
Ceramic film, home

Ceramic

Low reflectivity for people who want more natural light, with solid heat rejection and UV protection.

Learn more →
Spectrally selective film, home

Spectrally selective

Low reflectivity and nearly clear to the naked eye, with strong heat rejection for how light the shade is.

Learn more →
Frosted film, home

Frosted and decorative

Blocks the view day and night while natural light still comes through. You give up the view out. Available in a range of frosted looks and patterns.

Learn more →
Security film installation

Security

Clear film that helps keep broken glass in the frame if it is hit. It does not make glass unbreakable, and how well it holds depends on the film and how it is installed.

Learn more →
Turf protection film, home

Turf melt protection

Film made specifically to reduce the solar heat reflection that causes turf melt, grass burn and vinyl fence melting.

Learn more →

Not sure which fits? We’ll bring samples to your windows.

Get a free estimate
Film types compared →

3 · What changes

What changes once the film is on

Whichever film you choose, here are the things homeowners notice after tinting.

Heat

Solar control film rejects a large share of the sun’s energy at the glass, before it becomes heat in the room. Hot spots ease, and the sunniest side of the house runs closer to the rest.

Glare

Film reduces the bright light coming through, so TVs and screens are easier to see. There are many shades to choose from, from darker films that cut more glare to lighter films that keep rooms brighter.

UV and fading

Quality film blocks nearly all ultraviolet light, the main driver of fading in hardwood, rugs, upholstery and artwork.

Daytime privacy

Reflective films give one-way privacy when the outside is brighter than the inside. After dark with the lights on, the privacy effect goes away. If you want privacy day and night, frosted film is the answer.

Cooling load

Less solar gain means your air conditioning may run less in the hottest part of the day. We don’t publish a savings percentage, because the honest figure depends on your house, your glass and your thermostat.

Increased comfort

Rooms you stopped using become usable again. It’s one of the things customers mention most often.

Day and night privacy

Frosted film blocks the view in during the day and at night, while natural light still comes through.

Daytime-only privacy is also available with reflective films, but the effect reverses at night with lights on inside.

Turf protected

If sun reflecting off your windows has been damaging turf, plants, vinyl fencing or a neighbor’s siding, there are films chosen to help reduce that reflection.

5 · The visit

What the consultation looks like

Free on-site estimate

We look at the actual glass, ask which rooms bother you, and bring samples. About 30 minutes for most homes, and 45 to 60 minutes for larger properties.

You pick, we schedule

Two or three options with the trade-offs stated. No pressure and no same-day-only pricing.

Install

We lay down protection, detailed window cleaning, and clean up as we go. Most homes are one day. We ask that you clear the space around your windows beforehand.

Cure and care

Plan on about 30 days before cleaning the glass, which is typical manufacturer guidance. Haze or small water pockets can show for the first few weeks, and cooler or cloudier weather slows curing. We’ll give you the cure window for your film at install.

6 · The cost

What residential window tinting costs in Utah

What determines your price

Number of windows
Size of windows
Access
Film type
Old film removal
Window type

Typical project ranges

Small $300 – $1,500

One problem room, or a handful of windows.

Medium $1,500 – $5,500

A whole side of the house, a main floor, or every window in a smaller home.

Large $5,500 +

Whole-home coverage, large glass areas, or specialty film.

These are general ranges, not a quote. Each home is different and every price depends on things we can only see at your windows.
And it is not a sales appointment. No same-day-only pricing and no pressure to sign on the spot (you’re welcome to if you’re ready). If we look at your windows and decide film is not the right fix, we will tell you that instead of quoting. More on how we work →

Ready to see your numbers? The estimate is free.

Get a free estimate

Questions

What homeowners ask us

Is window tinting the same as window film?

For a house, yes — they are two names for the same thing, and we use both because customers do. “Tint” comes from automotive work and tends to suggest something dark; “film” is what the manufacturers call it and covers the whole range, including the nearly clear films that block heat without changing how the window looks. If someone quotes you “residential window tinting” and someone else quotes “residential window film,” they are quoting the same job. What actually differs between quotes is the film line, the VLT, and whether the installer checked your glass first.

Does it go on the inside or the outside?

It depends, most times we install the film on the inside of the window though depending on your window type and the purpose of the film an exterior install might be the best solution.

Can it go on dual-pane windows?

Usually yes, with the right film. We check the glass, the orientation and the window’s condition first and stay inside what is safe and the window manufacturer will warranty.

Will my rooms go dark?

Only if you pick a dark film. Spectrally selective and light ceramic films reject most of the heat while keeping the room bright — that is what they exist for. If natural light matters more to you, say so and we will show you options that will be best for you.

How long does it last?

Quality interior residential film installed correctly lasts many years, and the manufacturers back it with a warranty. Manufacturer warranties run up to lifetime coverage, depending on the film, and every installation carries our window tint installation warranty, matching the manufacturer’s film warranty.

Will it protect my floors and furniture from fading?

It will slow fading substantially by blocking the great majority of UV, which is the biggest single cause. It will not stop fading completely, because visible light and heat also fade materials. Anyone who tells you film eliminates fading completely is overselling it.

How do I clean the windows afterwards?

Wait until the film has cured. Film manufacturer recommendation is 30 days — we will tell you how long for your specific install. After that, a soft cloth and a mild, ammonia-free cleaner. No scrapers, no abrasive pads, nothing with ammonia.

Can it be removed later?

Yes. Film is removable, and done properly it comes off without damaging the glass. Adhesive residue is normal during removal and gets cleaned off as part of the job.

Does it have to be reflective to give me privacy?

It depends. Daytime privacy comes from the brightness difference between inside and out, so a film that darkens the glass helps — a neutral charcoal or a darker film offers a level of daytime privacy with a lower reflective sheen, and dual-reflective films are built to look reflective from outside while keeping a clear view from inside the home. The glass and its coating will still add some reflection in bright light. There are specific nuances that require us to see in person which dictate which films will actually provide the degree of privacy you are looking for.

If you need privacy that holds after dark, that is frosted or decorative film. You will lose the view but still get the natural light.

Will it give me privacy at night?

It depends on which privacy film you are thinking of. If you want privacy film that you can see through, you will get daytime-only privacy. We have several film shades that range from added daytime privacy to consistent daytime privacy. With all of these films you will still be able to see through.

If you want a film that offers both day and night privacy, you will need a frosted film. Frosted film gives day and night privacy while still letting natural light pass through. Other decorative films, such as textured, patterned or glass-design looks, can also offer day and night privacy, but they come in different levels of privacy, from least private to most private. If you are interested, we will tell you the specific privacy level of each one.

What does it cost?

Small jobs, one problem room or a handful of windows, typically run $300 to $1,500. A whole side of the house, a main floor or every window in a smaller home typically runs $1,500 to $5,500. Whole-home coverage and large glass areas run $5,500 and up.

These are general ranges, not a quote. Each home is different and every price depends on things we can only see at your windows. The estimate is free, and we don’t price by phone. What moves the number →

Which room is the problem?

Free on-site estimate across Utah, Salt Lake, Davis, Wasatch and Summit counties.

Get a free, no-pressure quote