Residential window film for heat, glare and fading
Blinds shut all day just to keep a room bearable, a TV you can’t watch until sunset, hardwood going pale by the sliding door. Solar control film goes on the glass you already have, cuts the sun’s heat and blocks UV, and most homes are done in a day, with no construction.
Heat, glare and fading all come from the same thing, the sun, and solar control film addresses all three. It’s a thin, clear layer applied to your existing glass, usually on the inside, that keeps much of the sun’s heat and UV out of the room while letting the light in. Films range from light and nearly clear to darker and more reflective, so how it looks and performs depends on the film we match to your windows.
On a house, the problem might be a couple of windows or several sides of the home, depending on orientation. We’re here to understand the problems you’re having and provide a tailored solution.
Looking at this for an office, store or building instead? The commercial solar control page →
What homeowners call about
People rarely call and say “solar heat gain.” They say one of these.
Glass with no overhang or shade tree takes the full run of the sun. The room heats faster than the rest of the house can cool, and the thermostat down the hall never sees it.
Glare is too much bright light, and it often gets described as heat. Film reduces the bright light coming through, so TVs and screens are easier to see. Darker shade films provide better glare reduction, though there are many shades you can choose from depending on your situation and preferences.
UV is a major cause of fading in hardwood, furniture, cabinets, rugs, leather and art, and quality film blocks nearly all of it. Film slows fading, but nothing stops it entirely, because visible light and heat fade things too.
Less solar heat coming in means your system cycles less in the hottest hours. How much you save depends on your glass, exposure and equipment, so we don’t promise a percentage.
Room by room
Tell us which rooms bother you, and we’ll show you options for each.
The problem. Heat, glare on the TV, and fading on the floors, furniture and couch.
What helps. Film that cuts the sun’s heat and glare and blocks UV, so the room stays usable and your furnishings last longer.
The problem. Heat, plus privacy when you want it.
What helps. Film that cools the room, with daytime privacy options that keep your view out. Frosted film gives privacy day and night.
The problem. Glare and heat from big windows or sliding doors.
What helps. Film that reduces glare and heat while the room stays bright.
The problem. Screen glare and heat.
What helps. Film that cuts the glare on your monitor, in shades light enough to keep the room bright.
The problem. Heat and fading.
What helps. Films that keep the view and natural light while cutting the heat, matched to large panes.
Common concerns
Every one of these is a real question, and every one has a straightforward answer.
Many HOAs that regulate window film focus on how reflective it looks from outside. We have low-reflectivity films suited to strict HOAs. We’ll help you choose the right one and help with the approval submission.
Only if you choose a film that makes it look that way. Dual reflective films have a reflective finish from outside in daylight and are often chosen for heat, glare and daytime privacy. Spectrally selective films have low reflectivity and are nearly clear to the naked eye. We put samples on your windows so you can see your options and which fits your needs.
Not when it’s installed correctly. The bubbling and purple fade people remember comes from cheap car tint, which is a different product. Architectural films like LLumar are made for building glass, and manufacturer warranties typically cover defects like peeling and delamination. Small water pockets can show for a few weeks while the film cures, which is normal.
The visit
We look at the actual glass, ask which rooms bother you, and bring samples. About 30 minutes for most homes, and 45 to 60 minutes for larger properties.
Two or three options with the trade-offs stated. No pressure and no same-day-only pricing.
We lay down protection, detailed window cleaning, and clean up as we go. Most homes are one day. We ask that you clear the space around your windows beforehand.
Plan on about 30 days before cleaning the glass, which is typical manufacturer guidance. Haze or small water pockets can show for the first few weeks, and cooler or cloudier weather slows curing. We’ll give you the cure window for your film at install.
What it costs
Price depends on the number and size of your windows, access, the film you choose and whether old film needs to be removed. The estimate is free.
Residential solar control FAQs
The ones with the problem, usually the glass that gets the most sun first. Glass that stays in shade rarely changes anything you can feel. We walk the house with you and say which windows we would do and which we would skip.
Not very. Heat rejection and darkness are separate properties, and many lighter films can still reject a meaningful share of the sun’s heat. If you want the glass to look as natural as possible, tell us.
It depends on the film. Lighter films keep rooms bright, and darker films cut more light and glare. We show samples on your own windows so you can judge before you decide.
Quality window film blocks nearly all UV, which is a major cause of fading in floors, furniture and cabinets. It slows fading, but nothing stops it entirely, because visible light and heat also fade things.
TSER (total solar energy rejected) is the share of the sun’s energy a film and glass combination keeps out, so higher is more. SHGC (solar heat gain coefficient) is the share of the sun’s heat that gets through, so lower is more. Compare them only on the same type of glass, because a film performs differently on different windows. For any film we recommend, we can show you the manufacturer’s published specs.
It depends on your windows and what bothers you. For a room that’s too hot, too bright or fading things, it’s often a practical fix. We’ll tell you if film isn’t the right solution.
You can buy film at a hardware store or on Amazon. The difference is the product (the quality of the film, tested performance and window compatibility), the installation (dust, creases and edge lift are common DIY results) and the warranty. Cheap self-installed film can be fine as a quick, temporary fix, but it isn’t recommended for a long-term solution that won’t ruin your view.
Usually on the inside. Some films are made for the outside, such as turf protection film, which has to be on the outside of the pane doing the reflecting. We’ll tell you which applies to your film.
Often yes. Sealed dual-pane and Low-E windows need the film matched to the glass, so we check your unit type, coating and the window manufacturer’s guidance before we recommend a film.
It can, depending on your window manufacturer’s terms. We check your glass and the manufacturer’s guidance before recommending a film. The window film warranty covers not only the film failing but also if there are issues that arise with the window.
Quality architectural film is made to last for years on residential glass. Warranty length varies by film and application. We’ll give you the expected lifespan for the film(s) you are interested in. Installed correctly and used normally, film should not peel, bubble or discolor.
Most homes are one day. We work room by room, lay down protection, clean the glass in detail and clean up as we go.
Yes. Film can be removed and replaced when it ages out or your needs change. How easy it is depends on the film and how long it’s been on the glass, and removal is a separate cost.
Yes, it works all year. In winter the sun sits lower and shines deeper into rooms, so glare and fading can still be a problem. On cold, sunny days film can reduce some of the free heat the sun adds, and many homeowners find the summer benefit matters more.
Related
Where we install it
Free in-home estimate with samples on your own glass.