Guide

Will window tint break my window?

It can, on rare occasions. On glass the film is approved for, the manufacturer’s warranty is there if it happens, which is why we check your glass before any film goes on.

Use film made for buildings

There are many types of window film, made for different jobs and built to different standards. Car window tint isn’t designed for home or business glass, and it typically isn’t covered by architectural film warranties. We use film made specifically for residential and commercial windows.

Why glass can crack

Glass can crack when part of a pane gets much hotter than the rest. The sunlit center expands, while the edge, shaded by the frame and held in place, stays cooler. That can happen with no film at all. Some films absorb more of the sun’s energy, and absorbed energy heats the glass, which can raise the risk. Glass industry guidance says thermal breaks start at a flaw on the glass edge and generally run at 90 degrees to the edge, and that shading, overhangs, window size and edge flaws all raise the risk. Source: Cardinal IG, Technical Service Bulletin IG24-12/20, “Insulating Glass Breakage”

How to tell a thermal crack

A crack that starts at the edge of the glass, often at a chip or nick, and meets the edge at about 90 degrees, with no sign of anything hitting the pane, may be thermal. A break with a clear point of impact is not. We don’t diagnose by description: if you see a crack, follow the steps below and send us the photos.

What we see more often

A cracked pane around the time of an install is not always thermal stress. In our experience it is more often a flaw that was already in the glass, such as a chip on the edge that the frame hides, or debris caught in the glass. That is one more reason we look at the edges and the condition of the glass before any film goes on.

How we check your glass

When we come to your home or business, we do a glass assessment. We look at the glass type, whether it’s double-pane or low-E, the pane size, the shading and the condition of the edges. Then we recommend films the manufacturer approves for your glass, so the film is compatible and can be covered by the manufacturer’s warranty. If there’s ever an issue with film compatibility on your windows, we’ll tell you, even if it’s the film you wanted. We’ll suggest a lighter or more reflective film, or leave that window alone. Checking compatibility is what lets the manufacturer’s warranty stand.

A question to ask any installer

“What glass do I have, and is this film approved for it?”

If an installer can’t answer, they haven’t done the assessment.

If glass ever cracks after an install

Before anything is replaced, photograph the whole pane and the spot where the crack meets the edge, note the date and time, and call us. We’ll document it and walk you through the manufacturer’s warranty process. Some manufacturer warranties include glass breakage coverage for specific films on approved glass, and we’ll show you the terms for your film before you decide.

Related

Keep reading

Have your glass looked at first.

Our top priority is to understand what you’re looking for and find the best film options for you based upon your needs as well as the windows that you have. Free on-site assessment.

Book an assessment Get a free estimate