Commercial solar control
Solar control film goes on your existing windows. It cuts the heat coming through, reduces glare on screens, and keeps the space in use while we work.
Solar control film is a thin optical coating, typically 1.5–2 mil, bonded to existing glazing. It is engineered to reject a defined portion of the solar spectrum — infrared, ultraviolet and some visible light — while letting the rest through. Modern ceramic and spectrally selective films reject part of the solar energy while staying close to clear, which is what makes them workable on an occupied office with a view worth keeping.
The commercial case is rarely about comfort alone. It is about tenant complaints you cannot otherwise answer, equipment running harder than it should, and glass replacement being the only alternative quote on the table.
What it fixes
The sunniest elevations become unusable while the shaded side is fine. Nothing you do at the thermostat fixes one side of a floor without ruining the other.
Solar gain through glazing is load your system has to remove. On a building where the glass is the weak point, cutting what arrives reduces what the plant works against during peak hours.
Different problem, different number. Glare is visible light, not total energy — which is why a film that fixes heat may not fix glare, and why we ask which one actually bothers you.
Merchandise in a window, flooring, artwork, upholstery. UV is the biggest single driver and quality film rejects 99%+ of it — though visible light and heat also contribute, so film slows fading rather than stopping it.
Blinds are the usual workaround. When a floor keeps its blinds shut all day, the building has paid for glass it can’t use, tenants lose the view they’re renting, and the lights are on at midday.
Blinds also work only after the heat has come through the glass. Film works at the glass, so it rejects part of that heat before it reaches the room. With the right film, the blinds can stay open and you keep the view and much of the daylight.
Choosing the film
Three figures describe a solar control film, they are not interchangeable, and a bid that names only one number leaves out part of the picture.
| Figure | What it measures | Matters most when |
|---|---|---|
| Total solar energy rejected TSER | The share of total solar energy — infrared, visible and ultraviolet — kept out of the space. The heat number. | The complaint is temperature, or you are chasing HVAC load |
| Visible light transmission VLT | How much visible light gets through. Higher reads clearer; lower reads darker. | Appearance, daylighting, and whether the building looks uniform from outside |
| Glare reduction | The reduction in visible light reaching the eye, relative to untreated glass. | The complaint is screens, not temperature |
A spectrally selective film can reject a lot of heat while staying light — excellent when the view and the daylight matter, less effective against severe glare. A darker or reflective film does more for glare and changes how the building reads from the street. Both are legitimate; which one is right depends on the complaint you are solving.
| Film type | How it looks | A good fit when | The trade-off |
|---|---|---|---|
| Near-clear ceramic or spectrally selective | Close to untreated glass from outside and inside | The view and daylight matter, or the frontage has to look the same | Does less against severe glare than a darker film |
| Neutral or darker tint | Visibly tinted, uniform | Glare on screens is the main complaint | Cuts daylight, and looks darker from inside |
| Dual-reflective | Reflective finish by day | Heat and daytime privacy are both needed, as in a ground-floor office or conference room | Privacy is a daytime effect; at night with the lights on, people outside can see in |
Our work
Midvale law officeDual-reflective film. Conference rooms and the sunniest offices got uncomfortably hot and hard to work in. The result: glare gone, rooms noticeably cooler, blinds can stay open, daytime privacy without blinds.
Salt Lake City furniture storeNear-clear ceramic film. Anything in front of the windows was starting to discolor, and until 3 p.m. the store was so hot the AC never stopped. The result: room noticeably cooler, less fading on floors and furniture, the light unchanged.
Lehi office conference roomWe installed a dusted crystal film band on the conference room glass partitions. It blocks the view in from outside, and it keeps people inside the room from being distracted by activity outside. The result is privacy day and night, with a clean look to the glass.
Not sure which elevations need film? We walk the building and tell you.
Book a site surveyMyths and facts
Your glass
It’s important to combine the right film to the right window. Improper pairing of film can prevent you from seeing the results you’re looking for or potentially damage the window.
Our film consultations include our team inspecting the windows to ensure compatibility with the film, making sure we offer the right film to solve your problems.
Construction, coating and position, elevation by elevation. We do not assume one answer covers a whole building.
Against the film manufacturer’s published glass compatibility chart. This is documented, not a judgment call.
Shading patterns, interior obstructions against the glass, existing damage — all of which change thermal stress risk.
Different glass can need different film. A single product across a whole building is a convenience, not a specification.
Where it goes
The classic case: one elevation unusable on sunny days, complaints the building system cannot answer, blinds shut all day.
Protecting stock from fading while keeping the frontage bright and the merchandise visible from the street.
Sun-exposed classrooms that run hot from midday, where glare on boards and screens is as much the issue as temperature.
Waiting areas with large glazing, plus rooms where temperature consistency matters more than it does in an office.
Sun-exposed dining rooms that empty at the exact hour they should be filling, because the window seats are unusable.
Clerestory and high-level glazing driving heat into a space that is expensive to cool and often only partly conditioned.
How a job runs
Most commercial film goes on buildings that cannot stop. We schedule around that rather than asking you to.
We walk every elevation, record glass types and counts, and ask which complaints you are actually trying to end.
Film appearance changes with the glass behind it. You approve from a sample on the actual building, not a swatch.
Most estimates are scheduled within about a week. We plan the install around your operations, including after hours, weekends or floor by floor. If you’re on a deadline, tell us.
Plan on about 30 days before cleaning the glass, which is typical manufacturer guidance. Haze or small water pockets can show for the first few weeks, and cooler or cloudier weather slows curing. We’ll give you the cure window for your film at install. Worth telling tenants in advance.
If you lease: check whether your lease treats film as an alteration. We supply the film specification and manufacturer documentation for your landlord’s review.
Deposit schedules the work, balance on completion, PO accepted.
Insured for commercial work, certificate on request.
Cost
Price depends on the amount and type of glass, the film, how high and how easy to reach it is, whether work has to be after hours, and whether old film needs to be removed. The site survey and the quote are free, with no obligation.
Commercial solar control FAQs
Most estimates are scheduled within about a week. Install timing depends on the scope, the film and your building’s schedule, and we plan around your operations, including after hours, weekends or floor by floor. If you’re on a deadline, tell us.
We will not give you a number, and you should be wary of a bid that does. Film reduces solar gain through glazing, which reduces part of your cooling load — how much that shows up in a bill depends on your glass area, orientation, system sizing, occupancy and how you run the building. What we will give you is the published performance of the exact film on your exact glass, which is the part that is knowable.
Depends entirely on the film. Spectrally selective products are close to neutral and hard to pick from the street; reflective films visibly change the elevation. If you are filming part of a building, matching the appearance of the untreated glass matters — we will show you the film on your own glazing before you commit.
Yes, and it is how most of this work happens. After hours, weekends, or a floor at a time. We need clear access to the glass, so whatever sits against the windows has to move — agreeing that in advance is usually the difference between a smooth job and a slow one.
For solar performance on an existing building, usually — it is a fraction of the cost, needs no structural work and happens in days rather than months. Replacement wins when the units have failed seals, the frames are at end of life, or you need performance beyond what film can add. We will say which situation you are in.
Solar control film reduces solar gain year round, so you lose a little free heat from glass that gets winter sun. In a Utah commercial building the summer load dominates by a wide margin. If winter heat loss is the real problem, that is an insulation and glazing question rather than a film one.
Sometimes, and sometimes not — the coating is already doing part of the job, so the incremental benefit is smaller, and an absorptive film over Low-E raises thermal stress risk. This is exactly the case where we check the compatibility chart rather than assume, and occasionally the honest answer is that a particular elevation should be left alone.
Yes. We can provide manufacturer spec sheets, test data and warranty documentation for any film we quote, and we will quote to a written scope if one exists — telling you plainly if we think any part of it is wrong.
Warranty length varies by film. We give you the duration and the manufacturer’s warranty documentation in writing. Installed correctly, quality film is made to last for years.
Yes. Film can be removed. How long it takes depends on the film and how long it has been on the glass, and we tell you before the install.
It can depend on the window manufacturer’s terms, so check yours. Send us the window or glass manufacturer’s name and we’ll go over the film manufacturer’s documentation with you.
Related
Where we install it
Free site survey, no obligation. We identify the elevations causing them and specify per glass type.